USED CONCRETE MACHINES

Are you interested in buying a paving stone factory?

We have several or single machines that could help you.

Contact us at 905-854-1624 or e-mail us at trevor@omni-stone.com.

All prices are F.O.B Toronto Canada.

Paving stone production Schlosser
Batch Plant Controls
Hydraulics
Surface Tumbler Line

All images can bee seen larger by clicking them with your mouse, however they tend to take longer to download

Paving Stone Production Schlosser VABH3	Description	Cost for entire plant $150,000.00 US
Click image to see it larger.	Schlosser VABH3 700x1400 rebuilt 1998. c/w Vickers hydraulics, Allen-Bradley automation and PC interface variable speed vibration and lots of extras. 2900 production boards steel covered both sides (these will last at least 10 years)
Click image to see it larger.	Press Hydraulic power pack. Rexroth 40 HP
Click image to see it larger.	Valve bank for press. Vickers 1 inch lines. New!
Click image to see it larger.	Valve bank for press
	Valve bank for press
Click image to see it larger.	Pallet feed into press
Click image to see it larger.	Press
Click image to see it larger.	Controls: Allen-Bradley c/w pc based interface. Unlimited programs for various products uses encoders and frequency drives for adjustment.
Click image to see it larger.	Controls
Click image to see it larger.	Rear of press
Click image to see it larger.	Dry side stacking (pull plate)
Click image to see it larger.	Henke elevator. Rebuilt 2004.
Click image to see it larger.	Dry side conveyor
Click image to see it larger.	PLC Panel on finger car. Allen Bradley 503 c/w frequency drives for motion control. Completed spring 2004.
Click image to see it larger.	Traverse car for finger car. c/w Allen Bradley 503 and frequency drive for motion control. Completed Spring 2004
Click image to see it larger.	Traverse car for finger car
Click image to see it larger.	Lowerator:Rebuilt 2004.
Click image to see it larger.	Elevator :Rebuilt 2004.
Click image to see it larger.	Lowerator
Click image to see it larger.	Power pack wet side
Click image to see it larger.	Press electronics....3 frequency drives for vibration control.
Click image to see it larger.	Carrier for finger car :Rebuilt 2004.
Click image to see it larger.	Strapping:Fromm M100 head .
Click image to see it larger.	Elevator and Lowerator (Henke)
Click image to see it larger.	Elevator and Lowerator (Henke)

Batch Plant Controls	Description	Price
Allen Bradley	503 pc Based automation for batch plant or any type of automation needs
Click image to see it larger.	Allen Bradly c/w pc based operator interface for batch plant or press.
Click image to see it larger.	Terminal panel
Click image to see it larger.	Terminal panel
Click image to see it larger.	Scale control. Ludwig moisture control.
Click image to see it larger.	Heavy duty press panel.
Click image to see it larger.	Control panel	$2500.00
Click image to see it larger.	High Voltage control for any press.c/w 4 new frequency drives for vibration control.	$10,000.00 us.
Click image to see it larger.	Operator panel c/w Allen Bradley plc and pc based interface. 1000 i/o to control an entire single pallet plant.	$10,000.00 us
Click image to see it larger.		$10,000.00 us

Hydraulics	Description	Price
Click image to see it larger.	35 HP c/w 6 valve manifold. 440v/110v valves.	$5000.00
Click image to see it larger.	1 in. valve bank 7 valve c/w accumulator.
Click image to see it larger.	Power pack 440v c/w 2 40HP pumps.4000psi, Rexroth pumps. Vickers valving.	$2500.00 us
Click image to see it larger.	Vickers 5 HP.440v	$2000.00 us

Surface Tumbler Line	Description
Fully automatic line Tumblers	Capable of treating surface of pavers to give a realistic "tumbled look" without the breakage of labor costs. Setup for bundled pavers but could easily be put in-line for a single pallet plant. Cycle time is about 4 minutes per cube or 13 seconds per layer
The following images are links to movies showing how these machines work. The files tend to take two to three minutes to download so please be patient.
	This machine is designed to handle bundled, cured pavers but could be easily modified to handle single layers in-line, or it could be modified to handle either configuration. This is the in-feed scissor table. The forklift operator places a palletized bundle , starts the sequence and goes to the out-feed table and removes a completed bundle for strapping/wrapping.
	As soon as the scissor table has raised to position the top layer is pushed off the bundle and onto the table where the bar-feed conveyor takes over and drags the layer under the flailing roller and onto the transfer table.
	The transfer table moves ahead to align the pavers for the next machine. The pavers are then pushed onto the next machine where the bar-feed takes over and drags the pavers through the flailing station and onto the next transfer table. This process is continued for the next two sides in order to flail all four sides of the top of all pavers and the pavers are re-stacked using a pull-plate into a bundle and removed for strapping/wrapping.
	MCC electrical station and controls are housed in a container and a remote button station is outside. Wireless remote control allows the forklift operator to control the entire machine without getting off his truck.

Are you interested in buying a paving stone factory?

We have several or single machines that could help you.

Contact us at 905-854-1624 or e-mail us at trevor@omni-stone.com.

Paving Stone Production Schlosser VABH3

Description

Cost for entire plant $150,000.00 US

Schlosser VABH3 700x1400 rebuilt 1998. c/w Vickers hydraulics, Allen-Bradley automation and PC interface variable speed vibration and lots of extras. 2900 production boards steel covered both sides (these will last at least 10 years)

Press Hydraulic power pack. Rexroth 40 HP

Valve bank for press. Vickers 1 inch lines. New!

Valve bank for press

Valve bank for press

Pallet feed into press

Press

Controls: Allen-Bradley c/w pc based interface. Unlimited programs for various products uses encoders and frequency drives for adjustment.

Controls

Rear of press

Dry side stacking (pull plate)

Henke elevator. Rebuilt 2004.

Dry side conveyor

PLC Panel on finger car. Allen Bradley 503 c/w frequency drives for motion control. Completed spring 2004.

Traverse car for finger car. c/w Allen Bradley 503 and frequency drive for motion control. Completed Spring 2004

Traverse car for finger car

Lowerator:Rebuilt 2004.

Elevator :Rebuilt 2004.

Lowerator

Power pack wet side

Press electronics....3 frequency drives for vibration control.

Carrier for finger car :Rebuilt 2004.

Strapping:Fromm M100 head .

Elevator and Lowerator (Henke)

Elevator and Lowerator (Henke)

Batch Plant Controls

Description

Price

Allen Bradley

503 pc Based automation for batch plant or any type of automation needs

Allen Bradly c/w pc based operator interface for batch plant or press.

Terminal panel

Terminal panel

Scale control. Ludwig moisture control.

Heavy duty press panel.

Control panel

$2500.00

High Voltage control for any press.c/w 4 new frequency drives for vibration control.

$10,000.00 us.

Operator panel c/w Allen Bradley plc and pc based interface. 1000 i/o to control an entire single pallet plant.

$10,000.00 us

Hydraulics

Description

Price

35 HP c/w 6 valve manifold. 440v/110v valves.

$5000.00

1 in. valve bank 7 valve c/w accumulator.

Power pack 440v c/w 2 40HP pumps.4000psi, Rexroth pumps. Vickers valving.

$2500.00 us

Vickers 5 HP.440v

$2000.00 us

Surface Tumbler Line

Description

Fully automatic line Tumblers

Capable of treating surface of pavers to give a realistic "tumbled look" without the breakage of labor costs. Setup for bundled pavers but could easily be put in-line for a single pallet plant. Cycle time is about 4 minutes per cube or 13 seconds per layer

The following images are links to movies showing how these machines work. The files tend to take two to three minutes to download so please be patient.

This machine is designed to handle bundled, cured pavers but could be easily modified to handle single layers in-line, or it could be modified to handle either configuration.

This is the in-feed scissor table. The forklift operator places a palletized bundle , starts the sequence and goes to the out-feed table and removes a completed bundle for strapping/wrapping.

As soon as the scissor table has raised to position the top layer is pushed off the bundle and onto the table where the bar-feed conveyor takes over and drags the layer under the flailing roller and onto the transfer table.

MCC electrical station and controls are housed in a container and a remote button station is outside. Wireless remote control allows the forklift operator to control the entire machine without getting off his truck.

Cost for entire plant
$150,000.00 US

Schlosser VABH3 700x1400 rebuilt 1998.
c/w Vickers hydraulics, Allen-Bradley automation and PC interface variable speed vibration and lots of extras. 2900 production boards steel covered both sides (these will last at least 10 years)

PLC Panel on finger car. Allen Bradley 503 c/w frequency drives for motion control.
Completed spring 2004.

Traverse car for finger car. c/w Allen Bradley 503 and frequency drive for motion control.
Completed Spring 2004